Intel Play Xq3 Driver

I m attempting to setup our Intel Play QX3 Microscope on Windows 8. So, Click Update Driver – select Browse my computer for driver software.

intel play xq3 driver intel play xq3 driver

Here are the instruction for installing the QX3 or QX3 Microscope with Windows 7:

Note, DO NOT use the software from the CD that came with the microscope.

DO NOT plug in the QX3 microscope until Step 4.

Before you run the programs below, right click the icon, click on Properties, click the Compatibility tab, check the box next to Run this program in compatibility mode for:, then choose in the drop-down box Windows 98 / Windows ME.

Step 1. Download and install the QX3PLUS.EXE software from Intel:

Y Inst Yes ProductID 160 DwnldID 4419 strOSs All OSFullName All 20Operating 20Systems eng

Step 2. Download and install the QCODINSTL.EXE software from:

LIVE ProductID 160 DwnldID 2089 agr N lang eng PrdMap 160

Step 3. Download and extract the QX3 Drivers from:

Step 4. Now, plug in the microscope.

When the Found New Hardware wizard appears you will see a message saying that the driver installation failed. You need to install the driver manually by following these steps:

a. Click START - Select Devices Printers

b. Right-click on the Intel QX3 Icon and select Properties

c. Click the Hardware tab - click Properties

d. Click Change Settings - click the Driver Tab

e. Click Update Driver - select Browse my computer for driver software

f. Browse to the folder with the extracted QX3 drivers from Step 3. above. The hardware should install successfully.

Double-click on the QX3 icon on the desktop and the program should run.

--- On Sun, 8/1/10, RICHARD WAMSER richard.wamser wrote:

From: RICHARD WAMSER richard.wamser

Date: Sunday, August 1, 2010, AM

Has anyone got the QX-3 INTEL-PLAY to work on Windows 7. .  I have tried but I have not been able to get it to work.   It shows up on the Device Manager The program Comes up but the Computer says it is not connected

Non-text portions of this message have been removed Hi Jim,

Please confirm that your computer is running the 32-bit verion of Windows 7 by right-clicking on Computer and seleting properties. If you see 64-bit Operating System, the QX3 will not operate.

PS Your doctek email address seems to be invalid.

--- On Sat, 1/28/12, Jim doctek wrote:

Subject: Re: Windows 7 Installation Instructions

Date: Saturday, January 28, 2012, PM

Everything works until the final

step. I get the message Windows could not find drivers for

your device. Needless to say, I unzipped the file with the

. cab. inf. and. cat files into a directory and pointed to

it as the source for the driver.

Any further guidance or suggestions would be greatly

appreciated. The QX3 is a useful little device even after

all these years, and I d love to be able to use it.

Here are the instruction for installing the QX3 or

QX3 Microscope with Windows 7:

Note, DO NOT use the software from the CD that came

Before you run the programs below, right click the

icon, click on Properties, click the Compatibility tab,

check the box next to Run this program in compatibility

mode for:, then choose in the drop-down box Windows 98 /

Step 1. Download and install the QX3PLUS.EXE software

c3 82 c2 a0 c3 82 c2 a0 c3 82 c2 a0 c3 82 c2 a0 or

ProductID 160 DwnldID 4419 strOSs All

OSFullName All 20Operating 20Systemsã ˆ eng

Step 2. Download and install the QCODINSTL.EXE software

When the Found New Hardware wizard appears you will

see a message saying that the driver installation failed.

You need to install the driver manually by following these

b. Right-click on the Intel QX3 Icon and select

e. Click Update Driver - select Browse my computer for

f. Browse to the folder with the extracted QX3 drivers

from Step 3. above. The hardware should install

Double-click on the QX3 icon on the desktop and the

--- On Sun, 8/1/10, RICHARD WAMSER

INTEL-PLAY to work on Windows 7. .  I have tried

but I have not been able to get it to work.   It shows

up on the Device Manager The program Comes up but the

Computer says it is not connected

Non-text portions of this message have been removed

What about the QX5 and windows 7 and a 64 bit Operating system I have not been able to get mine to work.

From: qx3 yahoogroups.com mailto:qx3 yahoogroups.com On Behalf Of Mark Mehall

Sent: Saturday, January 28, 2012 PM

Subject: QX3 Re: Windows 7 Installation Instructions

LIVE LIVE ProductID 160 DwnldID 2089 agr N lang eng PrdMap 160 ProductID 160 DwnldID 2089 agr N lang eng PrdMap 160

INTEL-PLAY to work on Windows 7. . I have tried

but I have not been able to get it to work.  It shows

Non-text portions of this message have been removed Hi Chris,

The QX5 should run fine on Windows 7 64-bit. Try unistalling the software and dowload the latest 64-bit version from here:

Make sure to install the software before plugging in the QX5.

--- On Sun, 1/29/12, Chris in Oregon wb8ypo wrote:

Subject: RE: QX3 Re: Windows 7 Installation Instructions

Date: Sunday, January 29, 2012, AM

Non-text portions of this message have been removed.

intel play xq3 driver
  • Input Device Windows XP INTEL 89.36MB 4/23/2012 1.0 Safe. Intel Play QX3 microscope is no longer being manufactured by Intel, but the drivers are still available.
  • Intel microscope driver, Intel Microscope, USB microscope, Intel Play, intel QX3, DigiBlue QX5, images, info software, used for educational and hobby purposes.
  • Download the latest drivers for your Intel Play QX3 Microscope to keep your Computer up-to-date.
  • Intel Play QX3 Microscope last downloaded: 13.1.2016 - 2016 version. 8 Users. Download Rating: 88. Driver scan: Intel Play QX3 Microscope - windows vista drivers.
  • There are currently no downloads available for Intel Play QX3 Computer Microscope Search all of intel.com. Need more help. Contact support.

Yahoo! Groups

intel play xq3 driver